Acoustical Boundary Microphone
The MPC 22 has been designed for flush mounting into tabletops, ceilings or walls. The unobtrusive design makes them ideal for use in round table discussions, tele/video conferencing or wherever a low profile microphone is needed.
The MPC 22 has a semi-cardioid polar pattern, which
increases the gain-before-feedback and reduces the ambient
noise.
ÁÖ¿äƯ¡
* Aimable half-cardioid
polar pattern
* High gain-before-feedback
* Flat, wide range frequency
response
* High-quality reproduction of speech
* Unobtrusive design
* Ceiling or tabletop mounting
* Fast and easy installation
½ºÆå
Transducer type |
Condenser (back electret) |
Operating principle |
Pressure gradient |
Frequency response |
65 - 20,000 Hz |
Polar pattern |
Semi-cardioid |
Open circuit voltage at 1 kHz (0dB = 1V/Pa) |
15 mV/Pa ¡Õ -36.5 dBV |
Nominal impedance |
200 ¥Ø |
Load impedance |
¡Ã 1000 ¥Ø |
Max. SPL at 1 kHz |
124 dB |
S/N ratio rel. to 1 Pa |
60 dB |
A-weighted equivalent SPL |
26 dB |
Power supply |
8 - 52 V phantom power |
Current consumption |
3.4 mA |
Connector |
3-pin XLR |
Length |
76/67 mm |
Shaft diameter |
M 20 x 1.5 thread |
Head diameter |
30 mm |
Weight without cable |
approx. 70 g |